NFPA 68
NFPA 68
(OP)
NFPA 68 gives a maximum mass for vent panels as 40 kg/m^2. I am not sure if this is meant to be 40 kg(force)/m^2 or if I need to multiply the number by the acceleration due to gravity. I am designing a vent panel and am having trouble deciphering what is required by the code. I am working in Imperial Units and this value is my limiting factor. Any suggestions, clarifications would be appreciated.





RE: NFPA 68
RE: NFPA 68
RE: NFPA 68
RE: NFPA 68
RE: NFPA 68