×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Recipe

Recipe

(OP)
Hi,

I was hoping that someone with some experience and background beyond my own would be able to give me some advice.  Perhaps this is a bit off topic, but I hope you'll think the stretching your your mental muscles a bit stimulating.

I'm interested in casting a loudspeaker enclosure from concrete in order to remove any panel resonances that there may be.  The enclosure will be a good size and will be for a home subwoofer.  I estimate that it will have about 6 ft^3 of material.  I'm hoping for it to weight 200 lbs or less, which means the density would have to be around 30 lbs/ft^3.

I've been looking at the 3M glass bubbles and have thought that the K37 was a good choice and also from speaking with a 3M rep through e-mail.

Would this be possible to get this low a density?  Also, How should the mix be reinforced?  Perhaps add some poly-pro fibres?  What would you recommend for proportions of materials and water?

I've seen some references to recipes that create a dry flaky result.  I obviously don't want this.

I've also seen some perlite recipes that have a great density, however, their compressive strength is very poor.  The compressive strength of the K37 is 3000 psi.  I would imagine that this could be a good solution.  I don't know about the bonding that could/would(?) occur betweent he cement and the aggregate.

Should there be some polymer additive?  Could you recommend one?

One benefit that I've thought would be good about the glass bubbles is that since they're separate cavities, they would help to absorb resonances and also diffuse the waves.

Thanks!


Brendon

RE: Recipe

An interesting question.  Perhaps you have already found your answer, but anyway I have a few thoughts ..

To absorb the sound on the inside, you correctly note that the the surface should be as textured as possible, with a range of intermixed texture depths.  A textured outside surface with rounded corners will help to reduce radiated sound.

For the structure of the cabinet to avoid resonance it should be accoustically dead.  For this it requires as much mass as you can handle, and it should have low resilience (low elasticity or springback) and should not be able to ring like a bell.  I suspect that glass is not good in this regard.  You need a cork-like material instead, but one that will bond to the cement.

You should probably use some fibre reinforcement, and as for other admixtures, I suggest you try experimentation.


Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources