Feature Group in NX7.5
Feature Group in NX7.5
(OP)
Hello,
I have a UG startup file in which there are some feature Groups. In that start up file i have created a new "Feature Group". But the Feature Group created by me having different icon as shown in the attached image.What could be the possible reason for this difference.
Please help me
Thanks in advance
I have a UG startup file in which there are some feature Groups. In that start up file i have created a new "Feature Group". But the Feature Group created by me having different icon as shown in the attached image.What could be the possible reason for this difference.
Please help me
Thanks in advance





RE: Feature Group in NX7.5
RE: Feature Group in NX7.5
Even if i add some features to it and do some operations, there is no change in the icon.
if i right click on the old feature group i am getting the command named "Make this group active" along with some general commands. I am not getting this with the New feature group created by me.
should i need to change any customer default setting. Please help me in this regard.
Thanks in advance
RE: Feature Group in NX7.5
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Feature Group in NX7.5
I am using NX 7.5.1.5.
I could activate or deactivate the Feature groups that are provided in Start up file. But this is not possible for the feature groups created by me.
Please help me John
have a nice day
Thanks in Advance
RE: Feature Group in NX7.5
I am looking forward for your kind help
Thanks in advance
RE: Feature Group in NX7.5
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Feature Group in NX7.5
Still i am struggling to get the difference between the Feature groups.Could you please help me.
is it due to difference in settings?
Thanks in advance
have a nice day
RE: Feature Group in NX7.5
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.