ASME Section II 2009b
ASME Section II 2009b
(OP)
Is there a 2009b Addenda to the ASME Section II 2007 Edition?
What I've seen in the past follows the 2007 Edition, 2008 Addenda, then a 2009 Addenda. I've not seen a 2009b Addenda.
.
Thanks in advance.
What I've seen in the past follows the 2007 Edition, 2008 Addenda, then a 2009 Addenda. I've not seen a 2009b Addenda.
.
Thanks in advance.





RE: ASME Section II 2009b
Patricia Lougheed
******
Please see FAQ731-376: Eng-Tips.com Forum Policies: Eng-Tips.com Forum Policies for tips on how to make the best use of the Eng-Tips Forums.
RE: ASME Section II 2009b
Thanks again.
RE: ASME Section II 2009b
RE: ASME Section II 2009b
I now have a second customer indicating that there was no Addenda between the 2009 Addenda (2009a) and the 2010 Edition.
One yes and one no. What's a poor certification clerk supposed to do?
RE: ASME Section II 2009b
At least now you will only be dealing with one (1) addenda between new code book issues. Now every other year instead of every three (3) years
by the way, my section II says add. 2009b
RE: ASME Section II 2009b
Patricia Lougheed
******
Please see FAQ731-376: Eng-Tips.com Forum Policies: Eng-Tips.com Forum Policies for tips on how to make the best use of the Eng-Tips Forums.
RE: ASME Section II 2009b
here is the front sheet of Section II 2009 Addenda
note that is says 2009b addenda
The 2008 addenda was noted 2008a
RE: ASME Section II 2009b
Thanks.
RE: ASME Section II 2009b
RE: ASME Section II 2009b
Though I'm not from Texas, I admit to being fully guilty of only looking at the IHS front page (which specifies only 2008 and 2009 with no letters.) Thanks for setting me straight.
Patricia Lougheed
******
Please see FAQ731-376: Eng-Tips.com Forum Policies: Eng-Tips.com Forum Policies for tips on how to make the best use of the Eng-Tips Forums.