Large Diameter Flange Info Required - 60" and Larger
Large Diameter Flange Info Required - 60" and Larger
(OP)
I am a piping engineer currently working on Feed Gas lines in the excess of NPS 60" to 78" diameter steel piping. ASME B16.47 only covers flanges up to 60" and therefor I am struggling to find info regarding the 'length through hub' and weight of large diameter flanges.
I would truly appreciate if feedback regarding sources covering these large diameter flanges could be forwarded.
Regards,
Erhard
I would truly appreciate if feedback regarding sources covering these large diameter flanges could be forwarded.
Regards,
Erhard





RE: Large Diameter Flange Info Required - 60" and Larger
RE: Large Diameter Flange Info Required - 60" and Larger
maybe it's a start
Greetings
RE: Large Diameter Flange Info Required - 60" and Larger
RE: Large Diameter Flange Info Required - 60" and Larger
RE: Large Diameter Flange Info Required - 60" and Larger
I'm forgetting my manners.
RE: Large Diameter Flange Info Required - 60" and Larger
When You get as old as me You'll understand :-/
Greetings
RE: Large Diameter Flange Info Required - 60" and Larger
Really? I built the first pipeline in the Gulf of Mexico from the deck of the Merrimack before they iron cladded it.
RE: Large Diameter Flange Info Required - 60" and Larger
I digitalized all this rubbish since 7 years ago.
Now I've got 2 dvd's full of (mostly) piping info.
Thank you for the stars,
I don't deserve it.
RE: Large Diameter Flange Info Required - 60" and Larger
http://w
http://www.coastalflange.com/customflanges.html
RE: Large Diameter Flange Info Required - 60" and Larger
I thought my smiley face was ON.
Everyone gets some when they don't deserve them and not enough when they do.
RE: Large Diameter Flange Info Required - 60" and Larger
http