.catdrawing background
.catdrawing background
(OP)
I received a .catdrawing from a tool maker. The background in the .catdrawing is black. How do I change it back to white so I can view it?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: .catdrawing background
Then choose your desired color.
I hope this helps.
RE: .catdrawing background
I tried this and it didn't work. I'm attaching a jpg of what the background looks like. I had also went to edit/sheet Background. This only changes the color to a lite gray. We have received a file like this before and had to request the tool maker to change it and resend it to us. I want to fix the problem here if at all possible.
It's almost like it is set for a negative effect.
RE: .catdrawing background
Did you try to copy-paste in another new drawing?
Regards
Fernando
cadromania.net - Romanian CAD forums
RE: .catdrawing background
You could try to see if you can change it. Do like this: On the "sheet" -> properties -> more -> standards. There is the sheet color defined under the "standard" - "the_standard" (it's the standard in which the drawing was make. it could be ANSI, or ISO or ....) - general - sheet colors
The problem is that usually the standard values can't be changed unless you run catia in administrative mode. So I think that Ferdo's suggestion could be the best for you...
RE: .catdrawing background
To make your life easier, try this macro attached.
Regards
Fernando
cadromania.net - Romanian CAD forums
RE: .catdrawing background
Copy and paste worked.