Mysterious letter F in NX6
Mysterious letter F in NX6
(OP)
Hello All
I was wondering if anyone has ever seen anything like this at all in NX 6.0.2.8 or any other NX installation for that matter. Every single letter F (only Capital letter F not the small letter f) is missing the middle (see pic) What could possible cause this? I am on a 64 bit machine (HP Z800 using Win XP 64 bit, and have installed NX 6.0.2.8 locally
Any Ideas? I am cluless and have never seen this before.
Kind Regards,
Mark
I was wondering if anyone has ever seen anything like this at all in NX 6.0.2.8 or any other NX installation for that matter. Every single letter F (only Capital letter F not the small letter f) is missing the middle (see pic) What could possible cause this? I am on a 64 bit machine (HP Z800 using Win XP 64 bit, and have installed NX 6.0.2.8 locally
Any Ideas? I am cluless and have never seen this before.
Kind Regards,
Mark





RE: Mysterious letter F in NX6
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Mysterious letter F in NX6
RE: Mysterious letter F in NX6
I think this is relevant to your case.
http://www