ANSYS APDL - macro detect contact
ANSYS APDL - macro detect contact
(OP)
Hi all,
Can somebody help me, or can offer some support in my next necessity:
-to made a macro which can detect automatically all surfaces or lines (must have possibility to choose only one of them) in contact;
-gap betweens surfaces in contact must can be tolerated (0 -> ...+);
-only on surfaces whose distance is between the tolerances will be selected and made with her contact (contact + target);
-if will be added in FEM model supplementary geometry, the existing contact must be ignored and added supplementary contacts (without influence the already existing contact);
-contact type made by default must be bonded contact with criterion Pure Penalty;
-the generated contact must be recognized be contact pair, and must appear on contact pair;
This macro have own role to reduce hard work in ANSYS APDL.
I appreciate all support, any idea or suggestion which can help me to resolve my macro.
Best regards
Can somebody help me, or can offer some support in my next necessity:
-to made a macro which can detect automatically all surfaces or lines (must have possibility to choose only one of them) in contact;
-gap betweens surfaces in contact must can be tolerated (0 -> ...+);
-only on surfaces whose distance is between the tolerances will be selected and made with her contact (contact + target);
-if will be added in FEM model supplementary geometry, the existing contact must be ignored and added supplementary contacts (without influence the already existing contact);
-contact type made by default must be bonded contact with criterion Pure Penalty;
-the generated contact must be recognized be contact pair, and must appear on contact pair;
This macro have own role to reduce hard work in ANSYS APDL.
I appreciate all support, any idea or suggestion which can help me to resolve my macro.
Best regards
Mess with the best die like the rest...ANSYS is the best !!!





RE: ANSYS APDL - macro detect contact
Mess with the best die like the rest...ANSYS is the best !!!