ST2 mirror part in assembly problem
ST2 mirror part in assembly problem
(OP)
We have just upgraded from V20 to ST2 and have a problem with Mirror Parts in assembly.
Any parts that are flagged as Mirrored throw up this error message -
"The part cannot be placed. make sure it is not a feature library part."
These are just ordinary parts modelled by us in V20.
Any parts flagged as rotated process correctly.
Any ideas?
I don't know what MP we are on but help shows version 102.00.02.06.
Any parts that are flagged as Mirrored throw up this error message -
"The part cannot be placed. make sure it is not a feature library part."
These are just ordinary parts modelled by us in V20.
Any parts flagged as rotated process correctly.
Any ideas?
I don't know what MP we are on but help shows version 102.00.02.06.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?





RE: ST2 mirror part in assembly problem
thread562-276707: Assembly Mirror Issue
Apart from reinstall does anyone know of a fix?
We are on MP2 I think (Version 100.00.02.06)
Does latest MP fix it?
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?