fem codes and tools information
fem codes and tools information
(OP)
Dear all,
I have to start a research about fem software and tools.
Does anybody know where I can find a good list, with technical information, of fem codes (especially for non linear analysis such as material and large displacement) and tools (pre and post processor and mesh utilities).
However, does anybody know of there is a good mid plane mesher that can mesh starting from solid model coming out, for example, from CATIA or PRO-E?
Thanks a lot
Gisky
I have to start a research about fem software and tools.
Does anybody know where I can find a good list, with technical information, of fem codes (especially for non linear analysis such as material and large displacement) and tools (pre and post processor and mesh utilities).
However, does anybody know of there is a good mid plane mesher that can mesh starting from solid model coming out, for example, from CATIA or PRO-E?
Thanks a lot
Gisky





RE: fem codes and tools information
for more resources about the non-linear parameter like study, you can search all kinds of search engines.
And, my suggestion for Meshing, Hypermesh, Ansa, Medina are the powerful tool. Among this Hypermesh, is the tool which does tetra,hexa/penta,shell, all kinds of meshing..
RE: fem codes and tools information
Thanks for your suggestions.
Actually, we are using for non-linear analysis MSC Marc that is, in my opinion, very powerful. By the way, it would be important to compare different software.
I know that is quite a hard work so that it would be easy to start with a research already done.