RTJ flanges
RTJ flanges
(OP)
Guys,
We specified 36-inch R98 RTJ gaskets. These are octagonal per ASME B16.20. Our client managed to purchase KaMOS oval gaskets. B16.20 does not list oval R98, only octagonal. Can we use oval or are we SOL? This is for subsea 600# sweet gas service.
Chris
We specified 36-inch R98 RTJ gaskets. These are octagonal per ASME B16.20. Our client managed to purchase KaMOS oval gaskets. B16.20 does not list oval R98, only octagonal. Can we use oval or are we SOL? This is for subsea 600# sweet gas service.
Chris





RE: RTJ flanges
manufactured in accordance with both API 6A
and ASME B16.20 size/ratings. Available in
both oval and octagonal configurations, both
types are interchangeable on the modern
octagonal type grooved flanges."
Page 7, Paragraph 2
http://www.flexitallic.com/pdf/broRtj.pdf
For future reference,
"Offshore it's better to be good than lucky." BigInch
"I am sure it can be done. I've seen it on the internet." BigInch's favorite client.
http://www.youtube.com/watch?v=hpiIWMWWVco
"Being GREEN isn't easy." Kermit
http://virtualpipeline.spaces.live.com
RE: RTJ flanges
"I am sure it can be done. I've seen it on the internet." BigInch's favorite client.
http://www.youtube.com/watch?v=hpiIWMWWVco
"Being GREEN isn't easy." Kermit
http://virtualpipeline.spaces.live.com
RE: RTJ flanges
We use numerous R98 oval gaskets in our Therminol vaporizer heating system.
http