parts display as intersecting
parts display as intersecting
(OP)
hey guys i have a problem with my SW. My parts are showing all jagged and intersecting with each other. I'm having trouble remembering how to correct this.
Any small contributions towards the right direction are appreciated.
UGLAY
Any small contributions towards the right direction are appreciated.
UGLAY
SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot






RE: parts display as intersecting
SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot
RE: parts display as intersecting
SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot
RE: parts display as intersecting
- - -Updraft
RE: parts display as intersecting
SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot
RE: parts display as intersecting
SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot
RE: parts display as intersecting
RE: parts display as intersecting
https://w
Chris
SolidWorks 10 SP4.0
ctopher's home
SolidWorks Legion
RE: parts display as intersecting
Increase RAM and enable /3GB switch.
RE: parts display as intersecting
SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot
RE: parts display as intersecting
Chris
SolidWorks 10 SP4.0
ctopher's home
SolidWorks Legion
RE: parts display as intersecting
Does you allowed RAM to a Virtual Memory use..
My Computer, Right mouse button, Properties....
See Picture....1
http://fil
win XP has there some sentens.... "allowed 100% to use Virtual memory" Something simila... I don`t remember so good..
see pic 2 allso... the result must be similar :)
http://fil
If all is same, like my pictuser, then like "ctopher" say: Tools/Options/Document Properties/Image Quality
http://solidworksengineer.com
RE: parts display as intersecting
SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot