X form in shape studio
X form in shape studio
(OP)
Hello People
I'm having a tad of trouble with getting X form to do what I want. look at the attached video and you will see that I can get the sheet to move in one direction as I pull on the patch strings, yet if I pull the other ones, only the strings move and I cant get the sheet to form as I want it. Please put me out of my misery.
http://screencast.com/t/NTBkNDBj
Many thanks in advance :)
I'm having a tad of trouble with getting X form to do what I want. look at the attached video and you will see that I can get the sheet to move in one direction as I pull on the patch strings, yet if I pull the other ones, only the strings move and I cant get the sheet to form as I want it. Please put me out of my misery.
http://screencast.com/t/NTBkNDBj
Many thanks in advance :)
Best regards
Simon NX4.0.4.2 MP10 - TCEng 9.1.3.6.c - (NX6.0.3.6 MP2 native)
www.jcb.com
Life shouldn't be measured by the number of breaths you take, but by the number of times when it's taken away...





RE: X form in shape studio
Best regards
Simon NX4.0.4.2 MP10 - TCEng 9.1.3.6.c - (NX6.0.3.6 MP2 native)
www.jcb.com
Life shouldn't be measured by the number of breaths you take, but by the number of times when it's taken away...