Customer Defaults not working?
Customer Defaults not working?
(OP)
Hi guys,
I've been working on trying to get some of my settings set for my drawings but have been having some problems. I created a drafting standard with different line colors, text alignments, etc but in my drawings they don't show up as I set them; despite the standard being set.
Has anyone had a problem like this? It is getting a little irritating.
I've been working on trying to get some of my settings set for my drawings but have been having some problems. I created a drafting standard with different line colors, text alignments, etc but in my drawings they don't show up as I set them; despite the standard being set.
Has anyone had a problem like this? It is getting a little irritating.





RE: Customer Defaults not working?
What you need to do is to go to...
Preferences -> Drafting -> General
...look at changing the option you see in the section of the dialog titled 'Drawing Settings'. This will allow to either use the settings originally inherited by the template file or impose the current standard.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Customer Defaults not working?
Just to recap what I did:
I changed Drawing Settings to "Use Settings from Standard".
Under Customer Defaults I created a new standard where the text orientation is at an angle.
I saved the standard and set the standard, then restart NX with no success.
What I just noticed also, is under the drafting customer defaults, I have changed all the colors to black. When I'm in drafting, all arrows and lines still come up brown.
Thanks in advance,
Chris
RE: Customer Defaults not working?
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Customer Defaults not working?
Best regards,
Michäël.
NX4.0.4.2 MP10 / TCE 9.1.3.8_build_0711 / NX6.0.5.3 + TC8.1 Unified / NX7.0.0.9
Belgium