Catia meshing problem
Catia meshing problem
(OP)
why I cannot mesh a part with 2 bodies in Catia? what I am doing wrong?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Catia meshing problem
Only the PartBody (no other Body) can be meshed in CATIA.
Work with CATProduct and 1 body per part.
indocti discant et ament meminisse periti
RE: Catia meshing problem
Can any of you guys help with how to create a assemble analysis file with only 2 parts.
I am happy with a single part analysis but cannot understand how to connect the 2 parts in the analysis mode.
can anyone help with the procedure on how to
Alpha
RE: Catia meshing problem
indocti discant et ament meminisse periti
RE: Catia meshing problem
But had some advice from other forum guys and hope that their
info helps.
but feel free to add any info.
Alpha