NX6 "NX Toobox"
NX6 "NX Toobox"
(OP)
Whereabouts is this topic located in the menu structure?
Excerpt from Help Files
"Once a part family has been created, the family table may be edited (using the NX Toolbox→Part Families→Edit function)" Our "gurus" have no idea what I am talking about.
Thanks Y'all
Excerpt from Help Files
"Once a part family has been created, the family table may be edited (using the NX Toolbox→Part Families→Edit function)" Our "gurus" have no idea what I am talking about.
Thanks Y'all





RE: NX6 "NX Toobox"
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: NX6 "NX Toobox"
RE: NX6 "NX Toobox"
RE: NX6 "NX Toobox"
"Once a part family has been created, the family table may be edited (using the NX Toolbox→Part Families→Edit function) to change either the set of family members, or the definitions of one or more members of the family.
In addition to editing the family table, the geometry of the template part for the family can be edited. If you edit the template part, all the members of the part family can be updated using PartFamily→Update in NX/Spreadsheet.
This causes any family members which already exist in Teamcenter and are out-of-date with the template to be updated. The update consists of overwriting the existing parts in the database."
My options in Excel are shown in the attached file. It seems that in prior releases that in the Tools menu there was NX Manager that had the Toolbox applet(?). Thanks again
RE: NX6 "NX Toobox"
Best regards,
Michäël.
NX4.0.4.2 MP10 / TCE 9.1.3.8_build_0711 / NX6.0.5.3 + TC8.1 Unified / NX7.0.0.9
Belgium
RE: NX6 "NX Toobox"
RE: NX6 "NX Toobox"
RE: NX6 "NX Toobox"
Best regards,
Michäël.
NX4.0.4.2 MP10 / TCE 9.1.3.8_build_0711 / NX6.0.5.3 + TC8.1 Unified / NX7.0.0.9
Belgium
RE: NX6 "NX Toobox"