How to clear "recently opened parts"
How to clear "recently opened parts"
(OP)
I use the UG NX5 at work, and I must to clear the history from the menutoolbar "recently opened parts". How can I do this???
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
How to clear "recently opened parts"
|
RE: How to clear "recently opened parts"
If you are trying to hide something from somebody, then open some new parts, and they will replace the old ones that are currently showing in there.
RE: How to clear "recently opened parts"
You can disable for viewing by going into Tools-Customize - File and then uncheck the items.
I don't want that the software save this .
RE: How to clear "recently opened parts"
RE: How to clear "recently opened parts"
For the recent file list... if you're brave, authorized, and at your own risk, you can clear the values in the registry with a .reg file that has entries like this:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Unigraphics Solutions\NX\7.5\General\Parts\Recent\Native]
"UG Native part name 1"=hex(2):00,00
"UG Native desc name 1"=hex(2):00,00
Mark Rief
Product Manager
Siemens PLM
RE: How to clear "recently opened parts"
Preferences -> Palettes...
...and select the 'Clear History' button at the bottom of the dialog. Note that this will clear the items shown on the History 'Palette', but unfortunately this does nothing with respect to...
File -> Recently Opened Parts
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: How to clear "recently opened parts"
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: How to clear "recently opened parts"
Then you could set it to 1 (or maybe 0)?