Modify form of Autoballoon
Modify form of Autoballoon
(OP)
I am using NX7.0 and I'd like to have on assembly drawing "Part list" and "Autoballon marks".Balloon marks should be in the form -part name- of course with leaders.There musn't be a "circle" mark or nothing else.
I do this steps to create mentioned above:
1.create assembly drawing
2.create "part list" on the drawing
3.create "autoballon" marks (there is number inside of circle)
4.now I'm trying to modify created "autoballon" marks
5.marked bar of "part list", twice push left button of mouse
6.in the discovered panel "Annotation style"
modifying "callouts" symbol to "NONE"
main symbol text to "part name"
7.push "Aplly" and "OK"
8.execute "Update Part List"
The result is:
there is correctly "part name" but there is "circle" mark over the part name all the time (even if I set the symbol on "NONE").
Please, what's wrong in the steps above, or what to do in other way to solve the problem?
Thanks very much for answers.
I do this steps to create mentioned above:
1.create assembly drawing
2.create "part list" on the drawing
3.create "autoballon" marks (there is number inside of circle)
4.now I'm trying to modify created "autoballon" marks
5.marked bar of "part list", twice push left button of mouse
6.in the discovered panel "Annotation style"
modifying "callouts" symbol to "NONE"
main symbol text to "part name"
7.push "Aplly" and "OK"
8.execute "Update Part List"
The result is:
there is correctly "part name" but there is "circle" mark over the part name all the time (even if I set the symbol on "NONE").
Please, what's wrong in the steps above, or what to do in other way to solve the problem?
Thanks very much for answers.





RE: Modify form of Autoballoon
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Modify form of Autoballoon
Is there anyway to display the part name without a symbol, even without an Underline?
RE: Modify form of Autoballoon
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.