Sequencing w/ autoballoon
Sequencing w/ autoballoon
(OP)
Hi,
I'm working with Sequencing on NX5.
Is there a way to have the part name showing so when you see parts moving you can identify which part is it? Some sort of "autoballoon for sequencing"
Thanks
Gaddi
I'm working with Sequencing on NX5.
Is there a way to have the part name showing so when you see parts moving you can identify which part is it? Some sort of "autoballoon for sequencing"
Thanks
Gaddi





RE: Sequencing w/ autoballoon
Go to...
Preferences -> Visualization -> Names/Borders
...and in the section titled 'Object Name Settings' toggle the 'Object Name Display' option 'View of Definition' ON. If you toggle on the 'Work View' option I've discovered that some of the Constraint names are also displayed which clutters up the display even more.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Sequencing w/ autoballoon
You are right, it's very clutter and it have both subassembly and assembly names as well.
I'll keep looking.
Gaddi