ISO 10474 where both 3.1C and 3.2 exist?
ISO 10474 where both 3.1C and 3.2 exist?
(OP)
Hi
I have to supply certificates to 3.1C.
I thought this was replaced by 3.2 under BSEN 10204.
Do you know if 3.1C certification is still applicable under standard ISO 10474?
I have to supply certificates to 3.1C.
I thought this was replaced by 3.2 under BSEN 10204.
Do you know if 3.1C certification is still applicable under standard ISO 10474?





RE: ISO 10474 where both 3.1C and 3.2 exist?
Steve Jones
Materials & Corrosion Engineer
http://www.oilandgaspeople.com/cv/11499664
http://www.linkedin.com/pub/8/83b/b04
RE: ISO 10474 where both 3.1C and 3.2 exist?
1)The specific test report 2.3 is cancelled
2)The inspection certificate 3.1.B is replaced by the inspection certificate 3.1
3)The inspection certificates 3.1.A and 3.1.C are replaced by the inspection certificate 3.2.
search google, en 10204 dansteel a/s
very good break down of EN-10204
Petrotrim Services