Is WRC 107 on Tangential Nozzles ?
Is WRC 107 on Tangential Nozzles ?
(OP)
I have a tangential nozzles welded to a pressure vessel.
I have to calculate the local stresses at nozzle / shell interface. Is WRC 107 applicable for tangential attachement ?
If not, is there any other easy way to determin local stresses.
Thanks,
K Nandwana
EWI
I have to calculate the local stresses at nozzle / shell interface. Is WRC 107 applicable for tangential attachement ?
If not, is there any other easy way to determin local stresses.
Thanks,
K Nandwana
EWI





RE: Is WRC 107 on Tangential Nozzles ?
RE: Is WRC 107 on Tangential Nozzles ?
http://www.paulin.com/WEBfe107-1.aspx
-Christine
RE: Is WRC 107 on Tangential Nozzles ?
It has rules for long doubler pads (which is similar a to tengential nozzle). You'll have to put your thinking hat on and read the appendix carefully to decide if your tangential nozzle is equivilant to a long doubler pad.