CSWE
CSWE
(OP)
Certified SolidWorks Expert
Is this higher than pro?
If you have taken this test, would you be willing to describe the differences from the CSWP?
Thanks,
Bob
Is this higher than pro?
If you have taken this test, would you be willing to describe the differences from the CSWP?
Thanks,
Bob






RE: CSWE
Dan
www.eltronresearch.com
Dan's Blog
RE: CSWE
Deepak Gupta
SW2009 SP4.1
SW2007 SP5.0
MathCAD 14.0
RE: CSWE
RE: CSWE
-handleman, CSWP (The new, easy test)
RE: CSWE
-Dustin
Professional Engineer
Certified SolidWorks Professional
Certified COSMOSWorks Designer Specialist
Certified SolidWorks Advanced Sheet Metal Specialist
RE: CSWE
-handleman, CSWP (The new, easy test)
RE: CSWE
-Dustin
Professional Engineer
Certified SolidWorks Professional
Certified COSMOSWorks Designer Specialist
Certified SolidWorks Advanced Sheet Metal Specialist
RE: CSWE
I am planning to do this. I will need to do those advances one before I go ahead. Any comments on contents of this exam will be appreciated.
Thanks
RE: CSWE
Dan
www.eltronresearch.com
Dan's Blog
RE: CSWE
Joe Hasik,
CSWP/SMTL/MTLS
SW 10 x64, SP 3.0
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600
RE: CSWE
I will follow your lead and admit that I failed it too. I made a dumb mistake as a result of not paying full attention to the images provided (rookie).
I wouldn't say the test is particularly difficult, but it is a catch all for concepts that don't have their own test. I would say that someone who has passed the CSWP and three other advanced exams and the CSWE is pretty proficient with SolidWorks.
-Dustin
Professional Engineer
Pretty good with SolidWorks
RE: CSWE
Joe Hasik,
CSWP/SMTL/MTLS
SW 10 x64, SP 3.0
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600
RE: CSWE
-Dustin
Professional Engineer
Pretty good with SolidWorks
RE: CSWE
That was a big disappointment for me & I wasted a bit of time there but managed to get it right in first try.
Thanks for your input, I feel pumped to go for CSWE now.
RE: CSWE
Check the new features here: New Features For Certification Exams Released
Also you can check the certified user on the SolidWorks Certification Center
Deepak Gupta
SW 2009 SP4.1 & 2007 SP5.0
MathCAD 14.0
Boxer's Blog