NX6, postbuilder, lathe, spindle output
NX6, postbuilder, lathe, spindle output
(OP)
Hi guys,
I am working on my very first lathe post and I am having major difficulties.
The post will not output any spindle commands unless it is at a tool change. Even if an operation has a completly different cutting speed, it ignores it.
Even if I just use a non modified, generic postbuilder post, it will NOT output spindle commands.
this is incredibly frustrating. The post contains a custom command called "mom_OUTPUT_SPINDLE" and it appears to be what I need, but even if I place the event into every possible location in postbuilder, I still get nothing output.
Am I missing something? is there a tickbox in NX that I need to select to output the spindle?
BTW, I want CSS output, not RPM.
Any help is appreciated
Jay
I am working on my very first lathe post and I am having major difficulties.
The post will not output any spindle commands unless it is at a tool change. Even if an operation has a completly different cutting speed, it ignores it.
Even if I just use a non modified, generic postbuilder post, it will NOT output spindle commands.
this is incredibly frustrating. The post contains a custom command called "mom_OUTPUT_SPINDLE" and it appears to be what I need, but even if I place the event into every possible location in postbuilder, I still get nothing output.
Am I missing something? is there a tickbox in NX that I need to select to output the spindle?
BTW, I want CSS output, not RPM.
Any help is appreciated
Jay





RE: NX6, postbuilder, lathe, spindle output
RE: NX6, postbuilder, lathe, spindle output
which his type around
if you can send me the post I fix for you
it's not hard to post and send me a sample file your
my e-mail and andrenxcam@yahoo.com.br
Andre ...
specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world
RE: NX6, postbuilder, lathe, spindle output
It worked like a charm.
Jay