UGNX6
UGNX6
(OP)
can anyone tell me, can i install ugnx6 to VISTA.because i tried to do that.but i got licence error?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: UGNX6
Are you installing on 32 or 64 bit Vista?
Is the VISTA machine also your license server?
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
RE: UGNX6
RE: UGNX6
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: UGNX6
RE: UGNX6
Secondly there are a few people out there unfortunately using illegal software, and as customers who have a reasonable investment in our systems we would be disinclined to help with their installation problems. Anyone who wouldn't contact their local support office about this seems to strike the wrong note in this regard.
Best Regards
Hudson
www.jamb.com.au
Nil Desperandum illegitimi non carborundum
RE: UGNX6
RE: UGNX6
Best Regards
Hudson
www.jamb.com.au
Nil Desperandum illegitimi non carborundum
RE: UGNX6
if your license is on a server, your need to enter the servername. somthing like portnumber@nameserver (as the admin of the server).
when installation is finished. You first need to connect to that server via VPN (look it up). You will probably need a password/account or something from your work.
then you can start your program without any problem as long you are connected to the licenseserver.
grtz
bvrml
RE: UGNX6
Like Hudson said, if you have a legal copy purchased from Siemens or a reseller, they are your first resort for help. Open forums are great for certain questions, but we don't like being taken advantage of by people using illegal copies.
There are 2 parts to a NX install.
1) Install the Flexnet license management software
2) Install the NX software
These are explained in the Installation guide that is on the disk with the programs.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli