Pulse counter turns on timed relay depending on number of pulses
Pulse counter turns on timed relay depending on number of pulses
(OP)
Working on a project with a pulsed output, 50 ms on 50 ms off
stays high on pulse is done
ex. if i have 5 pulses i want to trigger a relay for 5 minutes
if i have 1 pulse, the relay would be active for 1 minute, etc
Is there such an animal without going to a plc?
Paul
stays high on pulse is done
ex. if i have 5 pulses i want to trigger a relay for 5 minutes
if i have 1 pulse, the relay would be active for 1 minute, etc
Is there such an animal without going to a plc?
Paul





RE: Pulse counter turns on timed relay depending on number of pulses
Gunnar Englund
www.gke.org
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
RE: Pulse counter turns on timed relay depending on number of pulses
Paul