TCE unified slow start up issue
TCE unified slow start up issue
(OP)
Dear Mr. Baker and the rest of the community,
Switching from TCE9/NX4 to TCE Unified/NX6. We have slow start up preformance issues with TCE unified / NX6, it takes about 20min to start TCE unified. I've searched the net and the siemens PR/ER area, but found nothing. Did somebody had the same issue or can anyone give a clue in which direction to look for solving this?
Thanks in advance.
Switching from TCE9/NX4 to TCE Unified/NX6. We have slow start up preformance issues with TCE unified / NX6, it takes about 20min to start TCE unified. I've searched the net and the siemens PR/ER area, but found nothing. Did somebody had the same issue or can anyone give a clue in which direction to look for solving this?
Thanks in advance.
Best regards,
Michäël.
NX4.0.4.2 MP10 / TCE 9.1.3.8_build_0711 / NX6.0.2.8 / NX7.0.0.9
Belgium





RE: TCE unified slow start up issue
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: TCE unified slow start up issue
Best regards,
Michäël.
NX4.0.4.2 MP10 / TCE 9.1.3.8_build_0711 / NX6.0.2.8 / NX7.0.0.9
Belgium