tool lib
tool lib
(OP)
Hi frdz
1). How create New face mill cutters with 45 deg ... If i create with tool creation option there flute length, and cutter length how to give..
for Eg.
Cutter dia 100 mm
Tip angle 45 deg
flute length 6mm (sandvik facemill
coremill 345)
(Insert cutting lenght = flute lenth am I
rite)
Tool Length = 80 mm
2) How to create own TOOl LIBRARY and how to Export created tools to my own LIBRARY
THX and Regards
in2010in
1). How create New face mill cutters with 45 deg ... If i create with tool creation option there flute length, and cutter length how to give..
for Eg.
Cutter dia 100 mm
Tip angle 45 deg
flute length 6mm (sandvik facemill
coremill 345)
(Insert cutting lenght = flute lenth am I
rite)
Tool Length = 80 mm
2) How to create own TOOl LIBRARY and how to Export created tools to my own LIBRARY
THX and Regards
in2010in





RE: tool lib
For exporting to your own custom tool library, read up on the Exporting Tools to the Cutting Tool Library under NX Library in the Help. I prefer to modify the existing shipped library.
The actual export can be done from the Tool Dialog.
--
Bill