×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Graphic Dust Control
2

Graphic Dust Control

Graphic Dust Control

(OP)
I am looking for a standard or for recommendations for controlling the dust when machining graphite. This could be expressed in air velocity capacity or some such. I have checked a few standards bodies and have found nothing on the point. Thanks.

RE: Graphic Dust Control

Try an industrial ventilation handbook.  Graphite dust can be controlled with ordinary industrial hygiene dry collection methods.  In general, set your collection point as close to the dust source as possible.  If the dust has an initial velocity, try to collect it downstream so you're not changing the direction of travel.  If the operation is enclosed, a hood face velocity of around 100 fpm should be OK.  In the open the collection velocity will depend on initial dust velocity geometry of the collection zone, hood design etc.  A good industrial ventilation text will give you plenty of ideas.  I have seen Torit dust collectors used effectively.  Word to the wise, keep the dust out of your lungs (good advice for any dust) and keep it out of your electronics.

RE: Graphic Dust Control

An important consideration in machining graphite is that there is a strong galvanic reaction between carbon and steel. Wet or moist graphite will rust your steel machine tools very rapidly. Otherwise the dust is handled just like any other.

RE: Graphic Dust Control

Thinking further about your graphite situation, make sure you review your supplier's material safety data sheet for other things that may be in the graphite requiring stricter workplace exposure controls than necessary for graphite alone.  An example that comes to mind immediately is the silica found in natural graphite.  A good reference for your exhaust system design is the ACGIH Industrial Ventilation best practices handbook.

Bruce
www.accuratus.com

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources