Route surveying
Route surveying
(OP)
Hi there, Is there need for route surveying during a road upgrading project?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Route surveying
RE: Route surveying
RE: Route surveying
RE: Route surveying
Furthermore, all the pavement, drainage and signaling features should be registered thoroughly.
EngenhariaCivil.com - Civil Engineering Software, Ebooks and Videos (www.engenhariacivil.com)
RE: Route surveying
For a single course "mill and fill" (grind off the top course asphalt and pave a new layer oftop course), not much detail is needed. Mostly lengths, widths, pavement marking quantities, in-pavemtn signal detection hardware that may damaged by the milling, etc.
If you are planning a more involved rehabilitation or complete reconstrctuin, then much more detail is needed, such as cross slopes, profiles, locations of roadside objects, drainage structures and problems, etc.
"...students of traffic are beginning to realize the false economy of mechanically controlled traffic, and hand work by trained officers will again prevail." - Wm. Phelps Eno, ca. 1928
"I'm searching for the questions, so my answers will make sense." - Stephen Brust
RE: Route surveying