Dialog boxes width
Dialog boxes width
(OP)
Would it be possible to set individual dialog boxes width in NX 4 ?
I know there's a setting in the custom defaults to set a % but that influence width of all the boxes.
I'm expecially interested on setting Postprocessor dialog box to 200% while leaving other boxes width to 120%.
Thank you
I know there's a setting in the custom defaults to set a % but that influence width of all the boxes.
I'm expecially interested on setting Postprocessor dialog box to 200% while leaving other boxes width to 120%.
Thank you
Sandro Anderlini
Mould designer
Macerata - Italy





RE: Dialog boxes width
Now that being said, stating in NX 5.0 we've implemented the new style dialogs and while users still don't have direct control over individual dialogs, more control was given to the individual programmers using the dialog development tools so it's possible that if a particular application could benefit from a wider or larger dialog, it might have been implemented with that in mind, but you would have to look at NX in one of it's current versions to see if the dialogs which you're interested in have been improved or not.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.