How to initiate Ansys12 from NX6
How to initiate Ansys12 from NX6
(OP)
Hi,
I want to initiate Ansys 12.1 workbench from NX6.. Currently I have Ansys11 and Ansys12 on my system along with NX6.. On the menu bar, I have Ansys 11.0.. Iam unable to change it to show Ansys 12.1 , which when clicked initiates Ansys12.1 workbench.
Suggestions please
Thanks
I want to initiate Ansys 12.1 workbench from NX6.. Currently I have Ansys11 and Ansys12 on my system along with NX6.. On the menu bar, I have Ansys 11.0.. Iam unable to change it to show Ansys 12.1 , which when clicked initiates Ansys12.1 workbench.
Suggestions please
Thanks





RE: How to initiate Ansys12 from NX6
<Ansys Install Location>\v120\AISOL\CAD Integration\UnigraphicsNX6\winx64\startup
(replace winx64 with intel if you are on a 32 bit system)
Also, check to make sure that the WB 12.1 integration is supported from NX 6. It may not be.