NX6 Postprocessor queries
NX6 Postprocessor queries
(OP)
Hi
I Generated a Postprocessor for 3axis Milling. I that I have few doubts..
My program output is looks like below
and also I attache my postprocessor if you guys have time can u please go thorough that and suggest me where to change.
postbuilder used NX6
Thanks and Regards
Your file's link is: http://fil es.enginee ring.com/g etfile.asp x?folder=1 28d8ef5-2d b4-4d9a-96 75-3cd6f88 60a27& file=Mill_ 3_Axis.rar
============================================================
Information listing created by : holyghost
Date : 2/16/2010 9:56:54 PM
Current work part : C:\Documents and Settings\holyghost\Desktop\test part.prt
ode name : holyghost
============================================================
%
G40 G17 G90 G70 <<<<<<<<<<<<< This should come after TOOL Change....
(OPERATION TYPE:Z-Level Milling)
(OPERATION NAME:ZLEVEL_PROFILE)
(TOOL NAME:D20EM)
(TOOL DESCRIPTION: DIA 20.00,CORNER RADIUS 0.00)
(PART STOCK:0.00)
G91 G28 Z0.0
T01 M06 shouldcome here <<<<<<<G40 G17 G90 G70 and G54 ( work oordinate is missing)
G0 G90 Z10.00
G0 G90 X-25.783 Y9.559 S2500 M03
G43 Z10. H01
Z-7. <<<<<<<<<<<<<< Need " G code" like " G01 Z-7. F2500.
G1 X-25.783 Y9.559 Z-10. F250. M08
G41 G1 X-28.284 Y10. <<<<<<<<<<< " D " missing
G1 X-30. Y10.
G3 X-40. Y0.0 I0.0 J-10.
G3 X-40. Y0.0 I40. J0.0
G3 X-30. Y-10. I10. J0.0
G1 X-28.284 Y-10.
G40
G1 X-25.783 Y-9.559
G1 X-25.783 Y-9.559 Z-7.
Z10.
M02 <<<<<<<<<<<<<<< unwanted " M " code.
M30
(Cutting Time: 1.01 min)
(Machining Time: 1.39 min)
%
I Generated a Postprocessor for 3axis Milling. I that I have few doubts..
My program output is looks like below
and also I attache my postprocessor if you guys have time can u please go thorough that and suggest me where to change.
postbuilder used NX6
Thanks and Regards
Your file's link is: http://fil
============================================================
Information listing created by : holyghost
Date : 2/16/2010 9:56:54 PM
Current work part : C:\Documents and Settings\holyghost\Desktop\test part.prt
ode name : holyghost
============================================================
%
G40 G17 G90 G70 <<<<<<<<<<<<< This should come after TOOL Change....
(OPERATION TYPE:Z-Level Milling)
(OPERATION NAME:ZLEVEL_PROFILE)
(TOOL NAME:D20EM)
(TOOL DESCRIPTION: DIA 20.00,CORNER RADIUS 0.00)
(PART STOCK:0.00)
G91 G28 Z0.0
T01 M06 shouldcome here <<<<<<<G40 G17 G90 G70 and G54 ( work oordinate is missing)
G0 G90 Z10.00
G0 G90 X-25.783 Y9.559 S2500 M03
G43 Z10. H01
Z-7. <<<<<<<<<<<<<< Need " G code" like " G01 Z-7. F2500.
G1 X-25.783 Y9.559 Z-10. F250. M08
G41 G1 X-28.284 Y10. <<<<<<<<<<< " D " missing
G1 X-30. Y10.
G3 X-40. Y0.0 I0.0 J-10.
G3 X-40. Y0.0 I40. J0.0
G3 X-30. Y-10. I10. J0.0
G1 X-28.284 Y-10.
G40
G1 X-25.783 Y-9.559
G1 X-25.783 Y-9.559 Z-7.
Z10.
M02 <<<<<<<<<<<<<<< unwanted " M " code.
M30
(Cutting Time: 1.01 min)
(Machining Time: 1.39 min)
%




