Welding Cu-Ni tubes to SS tube-sheet
Welding Cu-Ni tubes to SS tube-sheet
(OP)
Any forum members have any experience with welding Cu-Ni (preferably 90-10) tubes directly to a SS tube-sheet without any overlay material, any grade of SS but especially 304 or 316? And yes, I did a search on this site but came up with nothing (one thread that was about expansion).
Thanks,
rmw
Thanks,
rmw





RE: Welding Cu-Ni tubes to SS tube-sheet
http://www.muggyweld.com/silversolder.html
RE: Welding Cu-Ni tubes to SS tube-sheet
rmw
RE: Welding Cu-Ni tubes to SS tube-sheet