Tracking Bar gone
Tracking Bar gone
(OP)
Need to restore tracking bar in NX5 any suggestions on how to restore it?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Tracking Bar gone
Basically you have to go into a command that uses the tracking bar (eg basic curves) and then go into your preferences and hit 'reset window position'. That should do it, if not - let us know.
RE: Tracking Bar gone
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Tracking Bar gone
RE: Tracking Bar gone
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Tracking Bar gone
So you can imagine the solution to have the tracking bar comme back.
I hope this help
Didier Psaltopoulos
www.psi-cad.com
RE: Tracking Bar gone
Preferences -> User Interface -> Layout
...go to the Settings section and select the 'Reset Window Position' icon (option button).
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: Tracking Bar gone
I wrote my post because I encountered this situation within one of my customer and the reset button didn't have any effect !!!
Please mirrorman44 send your feedback
Didier Psaltopoulos
www.psi-cad.com
RE: Tracking Bar gone