Race Car Upright - FEA Failed Edge using SolidWorks Simulation Express
Race Car Upright - FEA Failed Edge using SolidWorks Simulation Express
(OP)
Hi Guys
Does anyone know why I get a "failed edge" in Solidworks Simulation Express and how to fix it?
Help says I can highlight the problem by clicking on the named edge "Edge 0".
When I click on it it does not hi-light the problem. I have checked for any bad sketches, floating bodies and tried exporting to Iges files which picks up the same problem...
Any help would be great!
This is a relatively simple part for a race car. One solid body.
Picture attached.
Thanks
Dan Boardman
bmsdesignltd
danboardman1@gmail.com
Does anyone know why I get a "failed edge" in Solidworks Simulation Express and how to fix it?
Help says I can highlight the problem by clicking on the named edge "Edge 0".
When I click on it it does not hi-light the problem. I have checked for any bad sketches, floating bodies and tried exporting to Iges files which picks up the same problem...
Any help would be great!
This is a relatively simple part for a race car. One solid body.
Picture attached.
Thanks
Dan Boardman
bmsdesignltd
danboardman1@gmail.com






RE: Race Car Upright - FEA Failed Edge using SolidWorks Simulation Express
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376: Eng-Tips.com Forum Policies http://eng-tips.com/market.cfm?
RE: Race Car Upright - FEA Failed Edge using SolidWorks Simulation Express
I cut most of the model away and it still does comes up with the same message
SW bug I presume...
RE: Race Car Upright - FEA Failed Edge using SolidWorks Simulation Express
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376: Eng-Tips.com Forum Policies http://eng-tips.com/market.cfm?
RE: Race Car Upright - FEA Failed Edge using SolidWorks Simulation Express
RE: Race Car Upright - FEA Failed Edge using SolidWorks Simulation Express
corus
RE: Race Car Upright - FEA Failed Edge using SolidWorks Simulation Express
RE: Race Car Upright - FEA Failed Edge using SolidWorks Simulation Express
TOP
CSWP, BSSE
www.engtran.com www.niswug.org
"Node news is good news."