mechanical parts simulation
mechanical parts simulation
(OP)
Hi,
I am looking for a software to visually simulate a simple dynamic mechanical system consisting of a series of pulleys, springs, and masses. By visually simulate, I mean I want to be able to place pulleys, ropes, springs, and masses as I want them, and set an initial condition or create a disturbance and watch the whole thing move.
Ideally, I would also be able to put in dampers and set friction in the different components.
Are there any software out there that lets me easily do this?
Thanks
I am looking for a software to visually simulate a simple dynamic mechanical system consisting of a series of pulleys, springs, and masses. By visually simulate, I mean I want to be able to place pulleys, ropes, springs, and masses as I want them, and set an initial condition or create a disturbance and watch the whole thing move.
Ideally, I would also be able to put in dampers and set friction in the different components.
Are there any software out there that lets me easily do this?
Thanks





RE: mechanical parts simulation
htt
Actually I recently got hooked
Fe
RE: mechanical parts simulation
Fe
RE: mechanical parts simulation
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376: Eng-Tips.com Forum Policies http://eng-tips.com/market.cfm?
RE: mechanical parts simulation
Fe
RE: mechanical parts simulation
RE: mechanical parts simulation
RE: mechanical parts simulation
The orange vehicle weighs 640 kg, each box weighs 20 kg, and is a 0.8 m cube. The initial speed of the vehicle is 15 m/s. Roughly speaking what is the collision force between the dark green and light green boxes?
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376: Eng-Tips.com Forum Policies http://eng-tips.com/market.cfm?