×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Overhead Crane (CMAA-spec) Weld Repair Testing Requirements

Overhead Crane (CMAA-spec) Weld Repair Testing Requirements

Overhead Crane (CMAA-spec) Weld Repair Testing Requirements

(OP)
Does anyone know if there is a regulatory requirement for NDT testing of repair or renovation welds for overhead and jib crane structural components, either in CMAA (I don't find any there in the obvious places) or from OSHA or other sources?  Obviously, NDT testing is recommended to insure that the repair/renovation is proper, and to limit exposure (liability), but I am looking for regulations/specficiations that require the testing.  Thanks.

RE: Overhead Crane (CMAA-spec) Weld Repair Testing Requirements

Well here's where you find the Code of Federal Regulations:
http://www.gpoaccess.gov/cfr/index.html

There were some interesting hits using "crane, non-destructive testing" as a search.  Whether they would apply to you depends on your industry.

 

Patricia Lougheed

******

Please see FAQ731-376: Eng-Tips.com Forum Policies: Eng-Tips.com Forum Policies for tips on how to make the best use of the Eng-Tips Forums.

RE: Overhead Crane (CMAA-spec) Weld Repair Testing Requirements

Aside from the information posted above by vpllook for "under hook" devices in the reference. ANSI did have jurisdiction over such device and had very specific guidelines.
 
Working under the A?NSI guidelines we had to essentially become a repair facility for a number of devices used for lifting.  At the time it was dictated that one follow the manufacturers procedures right, wrong, or indifferent.

All our welding was done by Sec IX welders with MT in lieu of the PT called for by some manufacturers.   

RE: Overhead Crane (CMAA-spec) Weld Repair Testing Requirements

(OP)
Thansk to both of you for the info.  Not much I've found thus far in ANSI, and as usual Federal Docs. are difficult to search (and even more difficult to understand once you find the item you're loooking for!), but I will keep at it.

RE: Overhead Crane (CMAA-spec) Weld Repair Testing Requirements

If I recall there is no direct reference to a specific procedure for anything in the standards. Everything in the way of repair refers to the OEM. In short it says that the OEM should make the repair and as it was explained to me "they are the only ones that know the requirements for repairing the equipment and know what they are doing".  To get around this you can request a welding repair procedure from the OEM and hopefully they will provide one. In all cases I've been involved in the repair procedure was actually the production procedure.  Another approach would be that they send a person to supervise the repair, probably for a fee.  

I've seen four or five OEM weld procedures and all but one required PT, the other specified MT.

Just a word of advice if it has to do with any lifting device in an industrial setting make a concerted effort to follow the standards and if this is not possible use the best available engineering practices. This in your case would mean do NDT on the weld. I'll tell you that NDT is a very small price to pay compared to the consequences of failure.  

RE: Overhead Crane (CMAA-spec) Weld Repair Testing Requirements

(OP)
unclesyd:

couldn't agree more with the last statement.  In my case at hand, it is a third party not wanting to spring for the NDT, and the Onwer (my client) looking for a way to force them via regualtion/requirements/specification.  

I htink I've onvinced the Owner, as you say, that it is a small price to pay for peace of mind and reduction of liabilitiy, plus avoidance of legal ramifications, to have the NDT performed on their own.

Thanks.

RE: Overhead Crane (CMAA-spec) Weld Repair Testing Requirements

I don't know if the rules have changed since I was involved in such, but I would still want to know if the contractor doing the repairs has written permission of OEM to do the repair. In the same chain of thought did the welder have certification from some recognized authority.  
Just for a little CMA. I would try to ascertain this information. I always get leery when someone tries to get out of any NDT, especially something like PT.

Anecdotal:
This concerns fork trucks which fall under the same umbrella as lifting devices. There was an serious injury at a guest operation involving one of our fork trucks that had been legally modified and tested as per the OEM.  Operational problems caused the accident. This didn't stop OSHA from raking us over the coals and the thing that saved us was the records of the modification which included MTRs, Welder Certification, the OEM prints, NDT of the welds, and records of the operational test. OSHA actually did an audit of all our repairs to all the fork trucks and lifting devices.  They especially went after the stacker cranes.  
In the subsequent civil deposition on our part all we did was to lay out the records that we had presented to OSHA.  The lawyers took a few notes and left. We still caught a small percentage of the blame for not having anything in writing that stated not to operate the fork truck in this manner.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources