WRC 107
WRC 107
(OP)
Hello All,
Can anyone have spreadsheet for WRC 107 " Local Stresses in Spherical and Cylindrical shells due to external loadings"
Regards,
saku
Can anyone have spreadsheet for WRC 107 " Local Stresses in Spherical and Cylindrical shells due to external loadings"
Regards,
saku





RE: WRC 107
http:/
RE: WRC 107
HOW ARE YOU GOING TO WRC-1007/WRC-297 Software Quality Assurance
Boiler & Pressure Vessel Code Section VIII Division 1, WRC-1007/WRC-297 Software Quality Assurance Calculation:
1. The SUPPPPLIER shall ensure that computer software, when used or developed in conjunction with PO, performs its intended specific functions in relation to the delivery of the items. Work processes involving such software must be developed and implemented using national or international consensus standards, such as IEEE Std 730, that provide an adequate level of quality assurance.
2. Software quality assurance (SQA) includes activities such as:
• Software project management and quality planning;
• Software risk management;
• Software configuration control;
• Software procurement and supplier management;
• Software requirements identification and management;
• Software design and implementation;
• Software safety;
• Software verification and validation;
• Software problem reporting and corrective action; and
• Training of personnel in the design, development, use, and evaluation of software.
3. The SUPPPLIES shall establish and implement a SQA procedure for defining and controlling SQA activities relevant to the PO.
4. The SUPPPLIES shall submit the SQA procedure to the BUYER for review and acceptance prior to PO implementation.
L S THILL
RE: WRC 107
My exact requirement is to apply platform/ladder loads on pressure vessels. Is there any related excel spreadsheet.
Regards,
t_saku
RE: WRC 107
What is a SUPPPPLIER? What is SUPPPLIES?
I do not think tsaku100 was asking about quality assurance aspects he just asked if anyone had a spreadsheet!!!
RE: WRC 107
Have you done this sort of work before? Wouldn't you already have a program (either proprietary or internally developed) to do this? If you haven't then you probably shouldn't be doing this type of work commercially.
If you do have people qualified to verify the program then why not create one since you will use it again.
If this is a uni project then either you wouldn't be expected to do it or you would be required to do it by hand.
RE: WRC 107
You ask for help by structural engineering:
Advance search for a post 2006 ASCE or ASIC software attach for LADDER and Platforms give details and reference software.
L S THILL