spur gearbox
spur gearbox
(OP)
Do any of you know anyone who manufactures a 2:1 spur gearbox which can handle 8000NM?
I want to convert 90 degrees as output from an actuator to 180 degrees.
I understand that output will be reduced 50% by the ratio and probably a further 15% to 20% by inefficiency but believe that it would operate a 180 Choke Valve.
UK manufacturers preferred.
Thanks, Itascot.
I want to convert 90 degrees as output from an actuator to 180 degrees.
I understand that output will be reduced 50% by the ratio and probably a further 15% to 20% by inefficiency but believe that it would operate a 180 Choke Valve.
UK manufacturers preferred.
Thanks, Itascot.





RE: spur gearbox
The German brand Auma has suitable gearboxces and combinations available as standard single items. Also represented in UK
h
RE: spur gearbox
I contacted AUMA, but they dont have 2:1 and didnt see the advantage (or not in this case) of using a gerbox to "reduce" torque, suppose it is an odd requirement. Found a manufacturter called Tadler & they can supply.
http://www.tandler.co.uk/products.htm
Ciao
Itascot