NX6 part list
NX6 part list
(OP)
I am having trouble trying to figure out what controls the row height in an assembly parts list.
Is there something within "Preferences" that I can set to control the row height of the parts list?
The reason I am asking this is when new parts are added to the assembly the new row comes up with a smaller height than the other rows.
Is there something within "Preferences" that I can set to control the row height of the parts list?
The reason I am asking this is when new parts are added to the assembly the new row comes up with a smaller height than the other rows.





RE: NX6 part list
Select your Parts List note, pressing MB3, select 'Cell Style...', select the tab labeled 'Fit Methods' and toggle OFF the 'Auto Size Row' option.
If you ONLY edit the height of the existing rows, this option will still be in effect for any any new rows which may be added later.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: NX6 part list