Numerical display description in drafting
Numerical display description in drafting
(OP)
I have a drawing set to ANSI B and have my units set to inches. How come when I create a new dimension it comes in as an experssion of a foot (FEET_INC)? 2.50 in appears as .2'. Sure I can chage the diplay of the dimension after the fact, but how do I change the defaust setting so that all my new dimensions come in as NUM.DINC?
The glass is operating at 50% capacity.





RE: Numerical display description in drafting
You need to read FAQ section - see http://www.eng-tips.com/faqs.cfm?fid=1179
Regards
Fernando
RE: Numerical display description in drafting
I am not a CAD administrator by hobby or proffesion, nor am I a "computer geek".
Please spell it out for me.. letter by letter...
The glass is operating at 50% capacity.
RE: Numerical display description in drafting
2. Run CATIA by adding -admin right after CNEXT in the startup string in your CATIA Icon
This is assuming that you don't have a CATIA IT Support group that has modified any of these. If you do have a CATIA IT Support group, contact them.
See the online help section entitled "Common Functionalities - Administering Standards and Generative View Styles" for mor information.