×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Cross tie construction
5

Cross tie construction

Cross tie construction

(OP)
I have the idea to use cross ties for my home construction. Any knowledge of strucural methods to be used and tips will be appreciated. I am thinking that a mesh and cement parge would work for the exterior and EPS and board paneling for the interior w/ electrical chase for circuits. This would be an inexpensive material to use and yet offer strong structure and insulation properties. Any concerns or thoughts?

Thanks.  

RE: Cross tie construction

Pre-manufactured trusses are cheaper than collar ties, unless you just want the look.

Mike McCann
MMC Engineering
Motto:  KISS
Motivation:  Don't ask

RE: Cross tie construction

Are you considering new or recycled cross ties?  Recycled cross ties often have large areas of deterioration, particularly in the center where you don't see them.

They are extremely flammable and give off noxious gases when burned.  They are usually treated with carcinogenic materials for preservative treatment.

You might want to re-think that idea.

RE: Cross tie construction

If you are referring to rail road ties, I wouldn't dream of it.
Amongst other aformentioned problems, your house will stink like creosote forever.
As far as inexpensive, think again. The only people that I could see that would have any way of constructing a reasonable home from rail road ties would be those you see in the movie "Deliverance".  

RE: Cross tie construction

Don't even or ever think about usng RR ties in home construction.  Might even be illegal in some areas!!

RE: Cross tie construction

(OP)
Thank you for your very insightful replies to my concerns. But, let me ask; even if I apply a cement veneer on the exterior and poly w/ eps sheets, then paneling on the interior, do you believe it would cover and prevent the fumes and resist fire? If not I will re-think this idea. Thanks again for your reasonable judgment and insight.

RE: Cross tie construction

(OP)
Oh Stillerz, LOL, How right you are. But I am a rustic kind of guy. My other consideration is to use CMU's with possible the textured face.

Thanks.

RE: Cross tie construction

NO - it won't keep out the fumes.

DON'T USE THESE!!!  Unless you want a screaming headache, liver damage and eventual early death...

RE: Cross tie construction

1k saving in material, 100k worth of headaches. Use it in the yard, good luck.  

RE: Cross tie construction

Ditto, ties are not a good idea.  Handle a few bare handed or better yet cut into one with a power saw, and consider the aroma - the aroma that will NEVER go away.  Be careful about using them in a garden as well, never with rootcrops.  Find a local sawmill that will saw what you need from local stock and have it properly dried.  You can buy untreated ties directly from the mills, depending on your area.

RE: Cross tie construction

(OP)
Very good then, at least I have sought out counsel before going on with this thought. Ornery, your suggestion was my next consideration if all else failed.I would like to use this type of construction because of the insulation properties and considering that with building the main structure you would also be building the exterior and interior at the same time, just to be finished and or painted. I like the feel and look of cabin type homes. And I have been coming up with some pretty interesting methods of construction that would be considered unconventional by main stream ideas. Hence, the crazy one to build out of RR ties. Kind of funny looking back - just glad I didn't do it. LOL.

SlideRuleEra, Thank you, you have a cool website also, I checked it out. I will visit your site and hopefully learn to use the slide rule my Dad gave me. You know, I think it is amazing that we put men on the moon and brought them home safely only with the calculations of of a slide rule? Pretty interesting stuff. I have to wonder if, even with the technology we have today, wecould do it again.

  

RE: Cross tie construction

swan123...you mentioned a "mesh and cement parge" for the exterior.  I assume you mean portland cement plaster (stucco).  Keep in mind that stucco or any cement parging is not waterproof, so you will need to waterproof the exterior wall prior to placing such.  Use two layers of No. 15 asphalt saturated felt or one layer of "house wrap" followed by one layer of No. 15 felt.  Pay close attention to window flashings and make sure that all waterproofing materials, including window flashing, are placed in waterboard fashion.

RE: Cross tie construction

....I can hear "Duelling Banjos" in the far off distance when I read this post.
DO NOT USE THE RR TIES!!!!
THEY WILL KILL YOU!!!!

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources