how to get an stl from NX6
how to get an stl from NX6
(OP)
Is there way to get an stl ( maybe from jt) from Nx6. We haven't got a big mach license. We need it for our measuring device .
thx in ad
thx in ad
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
how to get an stl from NX6
|
RE: how to get an stl from NX6
RE: how to get an stl from NX6
Perhaps the only way you could miss this on the menu system is if you don't display full menus by default. My preference is to go into menu customisation and under the Options tabs turn on Always display full menus.
Best Regards
Hudson
www.jamb.com.au
Nil Desperandum illegitimi non carborundum
RE: how to get an stl from NX6
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.
RE: how to get an stl from NX6
Best Regards
Hudson
www.jamb.com.au
Nil Desperandum illegitimi non carborundum
RE: how to get an stl from NX6
I fixed it - was hidden ...
thx