VOSP callout
VOSP callout
(OP)
I have a drawing with the tolerance block stating +/-1/64" VOSP I am not sure what the letters stand for. Is this part of a standard? Thanks in advance.
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: VOSP callout
Of course, neither is fractional dimensioning, so I'm not sure looking to the standards will give you an answer, unless it was in an older one.
I'd try and ask whoever gave you the drawing if possible.
Otherwise, assuming you've already googled VOSP (http://acronyms.thefreedictionary.com/VoSP for instance) then I'd start guessing acronyms, which is dangerous. "Variation of Surface Profile" for instance.
What is Engineering anyway: FAQ1088-1484: In layman terms, what is "engineering"?
RE: VOSP callout
RE: VOSP callout
RE: VOSP callout
RE: VOSP callout
This illustrates the importance of not using obscure acronyms on drawings, or anywhere else.
Are you sure the acronym is in English?
RE: VOSP callout