"Error retrieving <part name> from the server" PDMW
"Error retrieving <part name> from the server" PDMW
(OP)
I am getting this error in PDMW SW2009 SP 3.0. The PDMW log says: "An existing connection was forcibly closed by the remote host"
The vault, server and client are all running on the same machine.
The vault validates OK and I reinstalled the PDMW server.
I created a test file, checked it in, and cannot check it out because of the same error.
This question has popped up on the SW fora and in the SW knowledgebase, but no definitive answers were ever posted. Any help would be appreciated.
The vault, server and client are all running on the same machine.
The vault validates OK and I reinstalled the PDMW server.
I created a test file, checked it in, and cannot check it out because of the same error.
This question has popped up on the SW fora and in the SW knowledgebase, but no definitive answers were ever posted. Any help would be appreciated.
TOP
CSWP, BSSE
www.engtran.com www.niswug.org
"Node news is good news."






RE: "Error retrieving <part name> from the server" PDMW
Joe Hasik,
CSWP/SMTL/MTLS
SW 09 x64, SP 4.1
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600
RE: "Error retrieving <part name> from the server" PDMW
BTW the error is a Winsock2 error which says that something can't talk to something else because it is being blocked.
TOP
CSWP, BSSE
www.engtran.com www.niswug.org
"Node news is good news."