×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

acceptable road gradients

acceptable road gradients

acceptable road gradients

(OP)
I have a client who would like to build his house on a site with a very steep access.  Looking at the topo-cadastral map the only possible route has a gradient in the region of about 1:3.5 Is this too steep for a driveway?  the length of this section would be about 100m

RE: acceptable road gradients

The steepest gradient I usually see quoted in guidance is 1:8 (12.5%). A 1:3.5 slope (i.e. a 28.5m rise over the 100m) is way too steep unless the owner has a Hummer, or a winch and steel cable located at the top of the slope. We (UK) usually reserve that sort of batter for embankment slopes.


(I assume from your ID that you are in Southern Africa/Swaziland so I don't suppose you'd otherwise have too much of a problem with ice/snow).

RE: acceptable road gradients

(OP)
thanks Debaser, we also work on the same gradients, but that is for public roads, was wondering if it could go steeper for a driveway.

Yep, in Swaziland, so no ice or snow

RE: acceptable road gradients

I can't say it's not been done;

http://en.wikipedia.org/wiki/Hardknott_Pass

but you'd certainly need some sort of flatter area (1:5 say) where the private road joins the public highway (and where nervous drivers can stop and let their brakes cool).

I can't see you getting any sort of service vehicles up there either (do you have tracked refuse lorries?), never mind constructing the thing (e.g. laying bitmac at 1:3).

RE: acceptable road gradients

Sorry, that should have read '...some flatter area (1:20 say)...' I'm mixing up my 1:X with my Y%'s.

RE: acceptable road gradients

Swaziland does have heavy rain, though. You'll need to do some serious drainage engineering to prevent the driveway turning into a donga. You also need to make sure that a nice summer thunder storm doesn't send a vehicle sliding off the side. I thought Swaziland and Mpumalanga were rolling hills.   

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources