PDMW Vault Admin not loading properly
PDMW Vault Admin not loading properly
(OP)
Any other vault admin had trouble with SW 2009 SP 4.1 PDMWorkgroups Vault admin not loading properly? I recently had a reformat done on my machine, now whenever I load the admin the GUI doesn't come up. The process is running, but nothing else. Any ideas?
Joe Hasik, CSWP/SMTL
SW 09 x64, SP 4.1
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600






RE: PDMW Vault Admin not loading properly
Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2009 SP 3.0
Dell 490 XP Pro SP 2
Xeon CPU 3.00 GHz 3.00 GB of RAM
nVida Quadro FX 3450 512 MB
3D Connexion-SpaceExplorer
RE: PDMW Vault Admin not loading properly
I actually rolled my install back to 0.0 to see if it made a difference, to no avail. Though now that you mention the registry thing...I need to check something, I'll let you knwo what I find out.
Joe Hasik, CSWP/SMTL
SW 09 x64, SP 4.1
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600
RE: PDMW Vault Admin not loading properly
Joe Hasik, CSWP/SMTL
SW 09 x64, SP 4.1
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600
RE: PDMW Vault Admin not loading properly
RE: PDMW Vault Admin not loading properly
Joe Hasik, CSWP/SMTL
SW 09 x64, SP 4.1
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600
RE: PDMW Vault Admin not loading properly
I've only a passing experience of Trend so cannot confirm or deny its suitability.
Norton is conspicuous by its absence from this Top 10 Review.
ht
RE: PDMW Vault Admin not loading properly
Joe Hasik, CSWP/SMTL
SW 09 x64, SP 4.1
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600