19 inch Rack
19 inch Rack
(OP)
Hi all,
I've done a search here trying to find a CAD model of a rack with no luck. I'm hoping someone can point me to a web site that at least has 2-D drawings of a rack. I know the mounting hole standards, I'm just trying to model a rack for a proposal; the dimensions for the vertical posts and front rail would be great.
Thanks,
Bob
I've done a search here trying to find a CAD model of a rack with no luck. I'm hoping someone can point me to a web site that at least has 2-D drawings of a rack. I know the mounting hole standards, I'm just trying to model a rack for a proposal; the dimensions for the vertical posts and front rail would be great.
Thanks,
Bob
"You can observe a lot just by watching"
Yogi Berra






RE: 19 inch Rack
http://www.3dcontentcentral.com/
Artem Taturevich, CSWP
Software and Design Engineer
AMCBridge LLC
www.amcbridge.com
RE: 19 inch Rack
Artem Taturevich, CSWP
Software and Design Engineer
AMCBridge LLC
www.amcbridge.com
RE: 19 inch Rack
The 3dcontent had something pretty close that I can use, I appreciate the tip. Believe it or not my company didn't pay for toolbox, so I don't have a registration code to activate it. Go figure :)
Thanks again,
Bob
"You can observe a lot just by watching"
Yogi Berra
RE: 19 inch Rack
http://d
Their home site is www.hoffmanonline.com
good luck
-Dustin
Professional Engineer
Certified SolidWorks Professional
Certified COSMOSWorks Designer Specialist
Certified SolidWorks Advanced Sheet Metal Specialist