ceramic PCB prototypes
ceramic PCB prototypes
(OP)
I know of many good houses for making low cost, fast turn PCB designs on FR-4 material. Does anyone know of any prototype fabs that can work with ceramic materials? Space and trace 0.006"/0.006" (0.15mm/0.15mm) is acceptable.
Thanks,
John D
Thanks,
John D





RE: ceramic PCB prototypes
h
RE: ceramic PCB prototypes
0.15 /0.15 is a fine pitch for a hybrid.
----------------------------------
If we learn from our mistakes I'm getting a great education!
RE: ceramic PCB prototypes
See this link ...
h