ugnx6 cam
ugnx6 cam
(OP)
when machining cavities using cavity milling i:e half a round with a ballnose end mill smaller than the round i am machining how do i control the depth to go all the way to the bottom?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: ugnx6 cam
See the attached file
John Joyce
Tata Technologies
1675 Larimer St.
Denver, CO
www.myigetit.com
NX3,4,5,6 Solid Works, Pro/e, Solid Edge